杰欧比五金

职位描述：

职位概述 

我们正在寻找一位经验丰富的工艺工程师，负责航空精密零部件的工艺方案设计、工艺文件编制及现场技术支持。主导从图纸到首件交付的工艺开发全流程，优化切削参数与加工路径，解决生产中的工艺技术问题，确保产品符合AS9100体系及客户规范要求。 

Overview 
Joby Metal is seeking an experienced Process Engineer to be responsible for process plan design, process documentation preparation, and on-site technical support for aerospace precision components. You will lead the full process development cycle from drawing review to first article delivery, optimize cutting parameters and machining paths, solve process and technical issues in production, and ensure products comply with AS9100 system and customer specification requirements. 

【岗位职责】 

1. 工艺方案设计 
-评审客户图纸及技术规范，识别关键及重要特性，确定工艺路线。 
-设计完整的工艺方案，包括工序划分、设备选型、基准选择、余量分配及检测方式。 
-针对铝合金、钛合金、复合材料、高硬材料等不同材料特性，制定切削参数、冷却方案及变形控制措施。 

2. 工艺文件编制 
-编制工艺流程图、作业指导书及刀具清单等标准工艺文件。 
-制定各工序的加工步骤、检验要求及注意事项，确保文件完整、规范、可追溯。 
-输出工艺定额（工时、材料消耗等），为成本核算及生产排产提供依据。 

3. 现场技术支持与问题解决 
-跟踪首件加工全过程，记录工艺参数，参与首件检验（FAI）的数据收集与分析。 
-快速响应现场工艺异常（尺寸超差、表面缺陷、刀具异常等），分析根本原因并制定解决方案。 
-指导操作人员按工艺文件作业，解释工艺要求及关键控制点。 

4. 持续改进与工艺优化 
-分析量产阶段的工艺数据，识别效率及良率提升机会，持续优化工艺方案。 
-参与不合格品（NCR）原因分析，提出工艺整改措施并验证有效性。 
-协助工程经理推动工艺标准化及技术经验库建设。 

Responsibilities 

Review customer drawings and technical specifications, identify critical and key characteristics, and determine the process route. 

Design complete process plans, including process division, equipment selection, datum selection, allowance distribution, and inspection methods. 

Define cutting parameters, coolant strategies, and distortion control measures based on the characteristics of different materials such as aluminum alloys, titanium alloys, composites, and hard-to-machine materials. 

Prepare standard process documents including process flow diagrams, work instructions, and tool lists. 

Define processing steps, inspection requirements, and precautions for each process to ensure documents are complete, standardized, and traceable. 

Output process quotas (working hours, material consumption, etc.) to provide a basis for cost accounting and production scheduling. 

Track the entire first article machining process, record process parameters, and participate in data collection and analysis for First Article Inspection (FAI). 

Respond quickly to on-site process abnormalities (dimensional deviation, surface defects, tooling anomalies, etc.), analyze root causes, and develop solutions. 

Guide operators to work in accordance with process documents, and explain process requirements and key control points. 

Analyze process data during mass production, identify opportunities for efficiency and yield improvement, and continuously optimize process plans. 

Participate in root cause analysis of Non-Conforming Reports (NCRs), propose process correction measures, and verify their effectiveness. 

Assist the Engineering Manager in promoting process standardization and the construction of a technical knowledge base. 

【任职资格】 

1. 经验与背景 

统招本科及以上，机械、飞行器制造、材料等相关专业。 

5年以上精密机加工工艺经验，其中2年以上航空零部件加工经验。 

主导至少1个完整航空项目（NPI到量产）的工艺开发，熟悉AS9100及FAI流程。 

2. 专业技能 

熟悉铝合金、钛合金、复合材料、高硬材料等航空材料特性及加工难点。 

熟练运用SolidWorks进行数模与图纸解析，了解主流编程软件（如UG/NX、Mastercam）的基本原理。 

熟练运用PFMEA、CPK、8D等质量工具，具备NCR分析与适航符合性意识。 

3. 核心能力 

较强的跨部门协调与客户技术对接能力。 

逻辑清晰，能快速响应现场工艺异常并做出技术判断。 

英文读写无障碍（图纸、规范、客户技术文件的交流）。 

Required 

Bachelor’s degree or above in Mechanical Engineering, Aerospace Manufacturing, Materials, or a related field. 

5+ years of precision machining process experience, including 2+ years in aerospace component machining. 

Proven experience leading process development for at least one full aerospace program from New Product Introduction (NPI) through mass production, with a good understanding of AS9100 and FAI processes. 

Desired 

Strong knowledge of aerospace materials such as aluminum alloys, titanium alloys, composites, and hard-to-machine materials, including key processing challenges. 

Proficient in SolidWorks for CAD model and drawing interpretation, with a basic understanding of mainstream programming software (e.g., UG/NX, Mastercam) principles. 

Skilled in PFMEA, CPK, 8D, and other quality tools, with awareness of NCR analysis and airworthiness compliance. 

Key Competencies  

Strong cross-functional coordination skills and the ability to interface with customers on technical matters. 

Clear, structured thinking with the ability to respond quickly to on-site process abnormalities and make sound technical decisions. 

Proficient in English reading and writing, capable of communicating through drawings, specifications, and customer technical documents. 

【发展路径】 

专业通道： 工艺工程师 → 高级工艺工程师 → 专家工艺工程师 

管理通道： 工艺工程师 → 高级工艺工程师 → 工程经理 

Career Path: 

Technical Track: Process Engineer → Senior Process Engineer → Principal Process Engineer 

Management Track: Process Engineer → Senior Process Engineer → Engineering Manager  

职位描述：

涡流检测工程师ET Engineer 

职位概述
我们正在寻找一位持有 NAS410 ET-2 认证的涡流检测工程师，我们专注于航空航天精密零部件的CNC加工。您将负责对公司加工的高价值航空航天产品执行专业的涡流无损检测，确保产品符合严苛的行业质量与安全标准。

Overview
Joby Metal is seeking an eddy current testing engineer with NAS410 ET-3 certification. We specialize in CNC machining of precision aerospace components. You will be responsible for performing professional eddy current non-destructive testing on the company's high-value aerospace products, ensuring they meet stringent industry quality and safety standards.

【岗位职责】
-根据NAS410及航空航天行业标准，独立完成铝合金、钛合金、高温合金等航空材料的涡流检测（ET），涵盖表面及亚表面缺陷检测。
-编制、维护和优化涡流检测工艺规程及作业指导书，确保检测流程符合客户及适航法规要求。
-准确判读检测信号，识别裂纹、气孔、夹杂等缺陷，出具规范的检测报告，并对检测结果进行记录与归档。
-参与新产品的NDT工艺开发，协助解决生产过程中出现的疑难缺陷分析问题。
-负责涡流检测设备的日常校准、维护及故障排查，确保设备精度与可靠性。
-配合质量体系（如EN9100）及客户审核，提供NDT相关的技术支持和文件证据。

Responsibilities
-Independently perform eddy current testing (ET) on aerospace materials such as aluminum alloys, titanium alloys, and high-temperature alloys, covering surface and subsurface defect detection, in accordance with NAS410 and aerospace industry standards.
-Develop, maintain, and optimize eddy current testing process specifications and operating instructions to ensure that the testing process complies with customer and airworthiness regulations.
-Accurately interpret test signals, identify defects such as cracks, porosity, and inclusions, issue standardized test reports, and record and archive test results.
-Participate in the development of NDT processes for new products and assist in resolving difficult defect analysis problems encountered during production.
-Responsible for the daily calibration, maintenance, and troubleshooting of eddy current testing equipment to ensure equipment accuracy and reliability.
-Provide NDT-related technical support and documentation in accordance with quality system (e.g., EN9100) and customer audits.

	
【任职资格】
1、经验与背景：
-大专及以上学历，材料、机械、无损检测或相关理工科专业。
-3年以上航空航天、军工或高端精密制造领域涡流检测实操经验。
-必须持有有效的 NAS410 ET-2级 证书（需提供证书复印件或编号备查）。
-熟悉常见航空航天铝合金、钛合金、不锈钢等材料的涡流检测特性及典型缺陷模式。
-有CNC加工件或复杂几何结构零部件检测经验者优先。

2、专业技能
-精通涡流检测原理及多频、多通道、远场、脉冲涡流等高级检测技术。
-熟练操作主流品牌（如GE、Olympus、Zetec等）涡流探伤仪及数据分析软件。
-能够独立设计对比试块、校准试块及制定检测灵敏度。
-熟悉ASME、ASTM、ISO、AMS及客户NDT规范，了解AS9100或NADCAP质量管理要求。
-具备基础的英语读写能力（能读懂英文技术规范及填写英文检测报告）。

3、核心能力
-严谨细致：对微小缺陷信号高度敏感，能精准判真伪、拒误判。
-问题解决：能针对复杂工件特征（如盲孔、倒角、薄壁等）优化检测参数。
-合规意识：严格遵守NAS410人员授权及复证要求，确保检测追溯性。
-团队协作：与CNC生产、工艺、质量部门高效沟通，推动质量闭环改进。
-持续学习：关注涡流检测技术前沿，主动适应新客户及适航标准更新。

Required
-Associate's degree or above in Materials Science, Mechanical Engineering, Nondestructive Testing, or related STEM field.
-At least 3 years of practical experience in eddy current testing in the aerospace, military, or high-precision manufacturing industries.
-Must hold a valid NAS410 ET-2 certificate (a copy or certificate number must be provided for verification).
-Familiar with the eddy current testing characteristics and typical defect modes of common aerospace materials such as aluminum alloys, titanium alloys, and stainless steel.
-Experience in inspecting CNC machined parts or components with complex geometries is preferred.

Desired
-Proficient in eddy current testing principles and advanced testing techniques such as multi-frequency, multi-channel, far-field, and pulsed eddy current testing.
-Skilled in operating mainstream brand eddy current flaw detectors (e.g., GE, Olympus, Zetec) and data analysis software.
-Able to independently design comparison blocks, calibrate blocks, and determine testing sensitivity.
-Familiar with ASME, ASTM, ISO, AMS, and customer NDT specifications; understands AS9100 or NADCAP quality management requirements.
-Possesses basic English reading and writing skills (able to read English technical specifications and complete English test reports).

Key Competencies 
-Meticulous and rigorous: Highly sensitive to minute defect signals, accurately identifying genuine and counterfeit defects and rejecting false positives.
-Problem-solving: Able to optimize inspection parameters for complex workpiece features (such as blind holes, chamfers, thin walls, etc.).
-Compliance awareness: Strictly adheres to NAS410 personnel authorization and recertification requirements to ensure inspection traceability.
-Teamwork: Communicates efficiently with CNC production, process, and quality departments to drive closed-loop quality improvement.
-Continuous learning: Stays abreast of the latest developments in eddy current testing technology and proactively adapts to new customers and updated airworthiness standards.

【发展路径】
-专业通道：涡流检测工程师 → 高级涡流检测工程师 → 专家涡流检测工程师 /涡流检测技术专家
-管理通道： 涡流检测工程师 → 高级涡流检测工程师 → 涡流检测主管 → 涡流检测经理

Career Path:
-echnical Track: ET Engineer → Senior ET Engineer → Expert ET Engineer/ET Technology Expert
-Management Track:  ET Engineer → Senior ET Engineer → ET Supervisor → ET Manager

职位描述：

职位概述 

我们正在寻找一位严谨、专业的质量管理体系工程师，您将全面负责公司质量管理体系的维护与优化，主导内审、外审迎审、管理评审资料搜集、文件控制及量具内外校工作，确保体系符合航空航天行业的高标准要求，助力公司持续提升过程管控能力与客户满意度。 

Overview 

Joby Metal is seeking a rigorous and professional quality management systems engineer who will be fully responsible for the maintenance and optimization of the company's quality management system. This includes leading internal audits, preparing for external audits, collecting management review materials, controlling documents, and calibrating internal and external measuring instruments. The goal is to ensure the system meets the high standards of the aerospace industry and help the company continuously improve its process control capabilities and customer satisfaction. 

【岗位职责】 

体系维护与改进：负责EN9100（航空航天质量管理体系）等体系的日常运行、监督与持续改进，确保体系文件有效、合规。 

内部审核：策划并组织实施年度内部审核，编制审核计划、检查表及审核报告，跟踪不符合项的整改闭环。 

外部审核：协调并配合第三方认证机构及客户审核，准备相关材料，推动审核发现项的及时关闭。 

管理评审：组织管理评审会议，收集输入资料，跟踪评审决议事项的执行情况。 

文控管理：负责公司质量体系文件（手册、程序文件、作业指导书、记录表单）的受控、分发、回收、归档及作废管理，确保现场文件版本有效。 

量具内外校：建立并维护测量设备台账，制定校准计划；完成内部校准（具备能力时）并出具记录，协调外部校准机构按期送检，处理校准异常结果。 

数据与报告：定期统计体系运行绩效（如审核合格率、不符合项关闭率、量具受检率等），向质量经理汇报。 

Responsibilities 

System Maintenance and Improvement: Responsible for the daily operation, monitoring, and continuous improvement of systems such as EN9100 (Aerospace Quality Management System), ensuring the effectiveness and compliance of system documents. 

Internal Audit: Plan and organize annual internal audits, prepare audit plans, checklists, and audit reports, and track the rectification and closure of non-conformities. 

External Audit: Coordinate and cooperate with third-party certification bodies and clients in audits, prepare relevant materials, and promote the timely closure of audit findings. 

Management Review: Organize management review meetings, collect input data, and track the implementation of review decisions. 

Document Control Management: Responsible for the controlled distribution, retrieval, archiving, and obsolescence management of the company's quality system documents (manuals, procedure documents, work instructions, record forms), ensuring the validity of on-site document versions. 

Internal and External Calibration of Measuring Instruments: Establish and maintain a register of measuring equipment, develop calibration plans; complete internal calibration (when capable) and issue records, coordinate with external calibration agencies to submit instruments for inspection on schedule, and handle abnormal calibration results. 

Data and Reporting: Regularly compile statistics on system performance (such as audit pass rate, non-conformity closure rate, gauge inspection rate, etc.) and report to the quality manager. 

【任职资格】 

1. 经验与背景 

本科及以上学历，工科专业（机械、航空、质量管理等）优先。 

3年以上制造业质量体系管理经验。 

熟悉EN9100或ISO 9001:2015标准，有成功主导通过第三方认证审核及客户审核的经验。 

有量具内部校准实际操作经验（如卡尺、千分尺、高度规、螺纹规等）及外部校准管理经验。 

2. 专业技能 

掌握ISO 9001、EN9100体系内审技巧，持有国家注册审核员或EN9100内审员证书者优先。 

了解计量法规（JJG、JJF）、量具误差分析与校准判定原则，会使用量具管理软件或Excel建立可追溯的校准数据库。 

能独立编写体系文件（手册、程序、SOP）及审核检查表。 

英文可运用于日常工作交流（听说读写熟练）。 

3. 核心能力 

严谨细致：对文件版本、校准周期、审核证据有高度的敏感性和责任心，杜绝体系“两张皮”现象。 

沟通协调：能有效组织跨部门（生产、工程、PMC、品质）参与内审、管理评审及整改活动，推动问题解决。 

问题解决：熟练运用8D、5Why、PDCA等方法分析不符合项根源，制定并验证纠正措施。 

抗压与合规意识：在航空航天行业的高合规要求下，能从容应对密集的客户审核和严格的外部监管检查。 

持续改进思维：主动识别体系运行薄弱环节，提出优化方案，提升流程效率与质量绩效。 

Experience & Background 

Bachelor’s degree or above, preferably in Engineering (Mechanical, Aerospace, Quality Management, etc.). 

Minimum 3 years’ experience in quality management systems within the manufacturing industry. 

Familiar with EN9100 or ISO 9001:2015 standards, and have experience successfully leading third-party certification audits and customer audits. 

Have practical experience in internal calibration of measuring instruments (such as calipers, micrometers, height gauges, thread gauges, etc.) and experience in external calibration management. 

Professional Skills 

Proficient in ISO 9001 and EN9100 internal auditing techniques; preference will be given to candidates holding a national registered auditor or EN9100 internal auditor certificate. 

Familiar with metrological regulations (JJG, JJF), instrument error analysis, and calibration judgment principles; able to use instrument management software or Excel to establish a traceable calibration database. 

Able to independently write system documents (manuals, procedures, SOPs) and audit checklists. 

Fluent in English for daily work communication (speaking, listening, reading, and writing). 

Key Competencies 

Meticulous and rigorous: Demonstrates high sensitivity and responsibility towards document versions, calibration cycles, and audit evidence, eliminating any disconnect between the system and its underlying structure. 

Communication and coordination: Effectively organizes cross-departmental (production, engineering, PMC, quality) participation in internal audits, management reviews, and corrective actions, driving problem-solving. 

Problem solving: Proficiently utilizes 8D, 5 Whys, PDCA, and other methods to analyze the root caus